📝 Overview
Smart Chart lets a provider record a visit from the Patient Chart. ChiroHD saves the recording to the visit and builds a written transcript you can read, copy or download. This article covers getting set up, recording, using the transcript, and fixing problems.
🧭 How to Get There
Where | How to get there |
Record Visit | Open the visit on the Patient Chart SOAP notes screen. The button is at the top right, next to Close and Save as Draft. |
Recording bar | A yellow bar across the top of the chart once you start recording. |
Smart Chart section | At the bottom of the Patient Chart SOAP notes screen after you stop. Click its header to open or close it. |
Transcript | View transcript in the Smart Chart section, or View Transcript at the top of the chart. |
⚠️ Record Visit only shows when the chart is open for a visit with an appointment on the Patient Chart SOAP notes screen. It isn't available in Provider Mode or Patient Mode of the SOAP notes screen.
Red box: the Record Visit button, top right of the Patient Chart.
✨ What Smart Chart Includes
🎙️ A Record Visit button for any appointment type
🔔 A confirmation before every recording
⏯️ Pause, Stop and Discard while you record
💾 The recording saved to the visit, with a player in the Smart Chart section
📄 A transcript that builds on its own after you stop, with a time for each line and voices labeled Speaker 1, Speaker 2 and so on
📋 Copy text and Download .txt for the transcript, and Download audio for the recording
🚫 Not included in this round
Smart Chart doesn't write or change your SOAP note. Chart the way you do today.
Speakers aren't named. The transcript doesn't say "Doctor" or "Patient."
Nobody can edit the transcript.
Clicking a transcript line doesn't jump the audio to that spot.
Each visit holds one recording. You can't add to it after you stop.
🔄 What stays the same
Recording a visit doesn't:
Mark the appointment as treated
Create or change charges
Change your note. The transcript only goes into your note if you copy it there.
Change anything on front desk or billing screens. The recording and transcript only show on the Patient Chart.
🩺 Which visits to record
Record visits where the conversation mattered: new patient exams, re-exams, progress checks. Quick maintenance adjustments where it's mostly "same as last time" can be skipped. You can also record a dictation after the patient leaves.
👥 Who Can Do What
Task | Who |
Record, pause, stop or discard | Anyone with the visit open on the Patient Chart |
Play, download or delete a recording | Anyone who can open that patient's chart at that location |
Read, copy or download the transcript | Anyone who can open that patient's chart at that location |
Edit the transcript | Nobody |
Turn Smart Chart on or off for a location | ChiroHD |
Saving, playing, downloading, deleting or restoring a recording, and opening or downloading the transcript, are each recorded in the patient's access log. There's no screen in ChiroHD that shows this log. If you need to know who opened a recording, ask ChiroHD support. If you want access restricted further, please submit your feedback to support.
⚙️ Before Your First Recording
Log out and back in once. After ChiroHD turns Smart Chart on for your location, each staff member should log out of ChiroHD and back in so Record Visit shows.
Use Google Chrome. It's the only browser that ChiroHD supports.
Check the microphone. A built-in laptop microphone works. Close Zoom, Teams or any other app that might be using it.
Allow the microphone. The first time someone clicks Record Visit, Chrome asks to use the microphone. Click Allow.
🗣️ Telling patients
Your clinic is responsible for making sure the patient, and anyone else in the room, knows the visit is being recorded. Your clinic is also responsible for any consent your state or your own policy requires. ChiroHD doesn't do this for you.
Every time someone clicks Record Visit, a reminder titled Before you record appears first:
By continuing, you confirm that the patient and anyone else present know this visit is being recorded and have agreed.
Click I confirm, start recording to begin, or Cancel to back out. Nothing records until you confirm.
ChiroHD keeps a note of who confirmed and when. That note doesn't replace any consent form your clinic needs.
🎙️ Recording a Visit
Open the visit on the Patient Chart.
Tell the patient you're recording.
Click Record Visit.
Click I confirm, start recording.
A yellow bar appears across the top of the chart with a timer and Discard, Pause and Stop. The button at the top changes to Recording.
Talk with your patient as usual. You can move around the chart while it records.
While recording, Close and Save as Draft are greyed out so the chart can't be closed by accident.
Red boxes: the recording bar, and the greyed-out Close and Save as Draft buttons.
⏸️ Pause, Discard and Stop
Pause holds the recording. The bar says Paused, and the button becomes Resume. Resume continues the same recording.
Discard deletes the recording completely and keeps nothing. It asks first. Click Discard, keep nothing to confirm, or Keep recording to go back.
Stop ends the recording and saves it to the visit. Nothing can be added afterward. It asks first. Click Stop and save to confirm, or Keep recording to go back.
⏱️ Long visits
A recording can run up to 90 minutes. At 75 minutes, a Recording Time Warning says 15 minutes are left. Click Continue Recording. At 90 minutes the recording stops and saves on its own, and a Recording Automatically Stopped message appears.
⚠️ Keep the tab open
Nothing is saved until you click Stop and save. If the browser tab is closed, reloaded or crashes during a recording, that recording is lost. Stay on the chart until you see Saved.
💾 After You Stop
The button at the top of the chart shows each step, usually within a few seconds:
Saving… The recording is uploading. Keep the chart open until it finishes. Long recordings take longer to upload.
Saved shows for about a second.
Transcribing… The recording is saved and the transcript is being built. You can leave the chart now. The transcript carries on without you.
View Transcript appears when the transcript is ready. The Smart Chart section says Transcript ready.
Red box: the top button reads Saving… while the recording uploads.
Red box: the top button reads Saved.
Red box: the top button reads Transcribing… once the recording is saved.
Short visits are typically transcribed in under a minute after the recording is saved. Longer visits, such as those lasting 20–30 minutes, generally take just a few minutes to process.
▶️ Playing the Recording
The Smart Chart section shows the recording's length, the date and time, and who recorded it. Below that is a standard audio player with play, pause, a slider to move to any point, and volume. Delete, Download audio and the transcript button are next to it.
Red boxes: the Transcribing… status, the audio player, and the Delete, Download audio and transcript buttons.
📄 Reading the Transcript
Click View transcript in the Smart Chart section, or View Transcript at the top of the chart.
The Transcript window opens with this notice at the top: Machine transcript, not reviewed. Speakers, names and some terms may be wrong.
Each line shows the time it was said (minutes and seconds from the start), the speaker and the words.
Red boxes: the Transcript ready status and the View transcript button.
Red boxes: the notice at the top, the time and speaker on each line, and the Download .txt and Copy text buttons.
🗣️ Speaker labels
⚠️ Speaker labels are a best guess, and short replies can land under the wrong name. Check who said it before you rely on a line.
The transcript works out voices from the audio. Speaker 1 is the first voice it hears, Speaker 2 is the next new voice, and so on. It doesn't know who is the provider and who is the patient.
A short reply right after the other person talks ("Yes," "32") is the most likely to land under the wrong speaker.
In a visit with three people, two of them can end up sharing one label.
A visit made up mostly of short replies can come back as a single speaker.
If the transcript can't tell who spoke, it shows Unknown speaker.
Read the labels as a guide, and check anything that matters against the recording.
Red box: a visit made mostly of short replies came back as one block under Speaker 1.
📋 Copying or Downloading the Transcript
Copy text copies the whole transcript so you can paste it into your note or anywhere else. Each line comes out as
[00:01] Speaker 1: …. The button changes to Copied ✓.Download .txt asks first: Download as a text file? It shows the file name. Click Download or Cancel.
File names follow this pattern: date, time, patient last and first name, appointment type, provider last name. Example: 2026-10-21_1600_Testpatient-S2-Scnote_Adjustment-Hydrotherapy_Williams.txt
🔒 The file name includes the patient's name. Once a file is on your computer, keeping it safe and deleting it later is your clinic's responsibility. Treat it like any other patient record.
Red box: Copy text changes to Copied ✓ after you click it.
Red boxes: the file name, and the Cancel and Download buttons.
⬇️ Downloading the Recording
Download audio asks first: Download this recording? Click Download to save a copy to your computer. The file is an M4A audio file, which opens on Windows and Mac, and it uses the same naming pattern as the transcript. The same responsibility applies.
🗑️ Deleting a Recording
Click Delete in the Smart Chart section.
Click Delete recording to confirm.
For 10 seconds, Recording deleted appears with an Undo button. Click Undo to bring it straight back.
Deleting removes the recording and its transcript from the chart, and you can record the visit again afterward. After the 10 seconds pass, contact support and we can restore both, no matter how long ago you deleted them.
🛠️ Troubleshooting
You see | What it means | What to do |
No Record Visit button | Smart Chart isn't on for this location, you haven't logged out and back in since it was turned on, the chart isn't opened from the Patient Chart SOAP notes screen for a visit with an appointment, or you're in Provider Mode or Patient Mode as Smart Chart is only available on Patient Chart | Open the visit from the Patient Chart SOAP notes screen. Log out and back in. If it's still missing, contact support to check that your location has Smart Chart. |
Record Visit greyed out | The chart is checking whether the visit already has a recording | Wait a second or two. |
Couldn't check for a recording with Retry | The visit's recordings didn't load | Click Retry. If it keeps happening, check your internet connection. |
Microphone Blocked | Chrome is blocking the microphone for this site | Click the icon at the left of the address bar, allow the microphone, then click Record Visit again. |
Microphone Not Available | No microphone found, or another app is using it | Connect a microphone, close Zoom, Teams or similar, refresh the page, then click Record Visit again. If it still fails, try another computer with Chrome. |
Recording Didn't Start | Something stopped the recording from starting | Try again. If it keeps happening, contact support. |
Stop the recording first | You tried to close or leave the chart while recording | Click Stop in the yellow bar, then Stop and save. |
Wait until the Smart Chart button stops saying Saving | You tried to leave while the recording was uploading | Wait for Saved. Recordings of 30 minutes or more can take a minute or two. |
Upload failed with Retry | The recording didn't reach ChiroHD but is still in this browser tab | Check your connection, then click Retry in the Smart Chart section (or Retry Upload at the top). Don't close or reload the page first. If it keeps failing, contact support. |
Recording not saved | The upload failed and the page was reloaded, so the audio is gone | Click Record again to start over, or Discard. |
Record Again where Record Visit was | The tab closed, reloaded or crashed during the last recording, and nothing was saved | Record the visit again if you still need it. |
"…started a recording of this visit… that hasn't been saved" with Record anyway | Someone started recording this visit in another tab, browser or chart | If it's still running, stop it there. Record anyway gives the visit two recordings, and only the newest shows. |
Transcript failed with Retry | The transcript didn't come back (ChiroHD already retried once on its own), or it said Transcribing… for three hours | Click Retry (or Retry Transcript at the top). The recording is safe and still plays. |
Transcript failed with no Retry | The retries are used up | The recording still plays and downloads. Contact support if you need the transcript. |
Transcribing… for more than an hour | The transcript is taking unusually long | Contact support. After three hours it changes to Transcript failed with Retry on its own. |
No speech found | The recording has no talking in it, or it's too quiet | Play it back. If the microphone wasn't picking up sound, fix that before the next visit. There's no Retry because the same audio would come back empty. |
Smart Chart section empty, or the recording won't play | The section is collapsed, the recording never finished saving, or the player couldn't fetch it | Click the section header to open it. Check whether it showed Saved, Saving… or Upload failed. If it showed Saved and still won't play, contact support. |
Couldn't load the audio | The player couldn't fetch the recording | Click Retry. |
Audio upload failed or incomplete | The saved recording is broken | Click Delete, then record again if the patient is still there. |
Couldn't open the transcript, Couldn't download the transcript or Couldn't download the recording | The transcript or file didn't load | Try again. |
Couldn't copy the text | The browser blocked Copy text | Select the text in the window with your mouse and copy it. |
Newest of 2 | The visit has two recordings, and only the newest shows. The older one is kept. | If the newest was a mistake, delete it and the older one shows. Otherwise contact support. |
Couldn't undo the delete | Undo didn't work | Click Undo again, or contact support. |
Red box: the No speech found message and its explanation.
📞 What to have ready for support
Your location, the patient, and the visit date and time
The provider's name
Roughly when you recorded or deleted the recording, and how long it was
The exact message on screen (a screenshot helps)
Your browser and computer type
❓ Frequently Asked Questions
Does Smart Chart write my note?
No. This round gives you the recording and a transcript. You can copy the transcript into your note yourself. A note written from the transcript is the next phase, and we'll let you know when there's a date.
Why do some short replies show under the wrong speaker?
Speaker labels are a best guess, and short replies can land under the wrong name. Check who said it before you rely on a line.
Why does it say Speaker 1 and Speaker 2 instead of names?
The transcript can tell voices apart but doesn't know who they are. Speaker 1 is the first voice it hears.
Can the transcript be edited?
No. If something is wrong, fix it in your note.
Do patients have to sign a consent form?
That depends on your clinic's policy and your state's law, so check with your own legal counsel. Your clinic is responsible for informing patients and anyone else present, and for getting any consent required. Before every recording, Smart Chart asks you to confirm that everyone present knows and has agreed, and ChiroHD keeps a note of who confirmed and when. That confirmation doesn't replace any consent form your clinic needs.
Who can see or hear a recording?
Anyone at your location who can open that patient's chart can play the recording, read the transcript, download either one, or delete the recording.
How long are recordings kept?
ChiroHD keeps every recording in secure storage and doesn't delete recordings automatically. The transcript is kept the same way. Deleting a recording removes it and its transcript from your chart, and ChiroHD keeps a copy of both that support can restore.
What does ChiroHD do with the recordings?
Recordings are kept securely with the rest of your patient records, inside the same protected environment. They are never used to train AI models.
I deleted a recording by mistake. Can I get it back?
For 10 seconds after you delete, click Undo. After that, contact support with the patient name, visit date and provider, and we can restore it.
Can I add more to a recording after I stop?
No. To capture more, delete the recording and record the visit again.
Can I record any type of visit?
Yes, any appointment type, as long as the visit has an appointment. ChiroHD notes the appointment type when you start recording, so it still knows the original type if you change it later.
Can I leave the chart while it's transcribing?
Yes. Once you see Transcribing…, the recording is saved. Don't leave while it says Saving….
Will my front desk or billing team see anything different?
No. The recording and transcript only show on the Patient Chart.
What happens to a file I download?
Once it's on your computer, keeping it safe and deleting it later is your clinic's responsibility. The file name includes the patient's name, so treat it like any other patient record.
Which browser should I use?
Google Chrome.
📌 Conclusion
If Record Visit is missing, open the visit from the Patient Chart and log out and back in. If the microphone won't start, allow it in Chrome and close other apps using it. If the status says Saving… or Upload failed, stay on the chart and click Retry. If the transcript fails, the recording is still safe, so click Retry or contact support. Treat every transcript as a draft, and check who said a line before you rely on it.
